VMC Machining Services
Vertical machining centres handle everything that is not a body of revolution — brackets, housings, yokes, levers, blocks and manifolds. Forged blanks arrive with generous fillets and draft, and our fixtures are designed specifically to clamp those forged forms without distortion.
- Table Travel
- Up to 1,000 x 500 mm
- Axes
- 3-axis with 4th axis option
- Positional Accuracy
- ±0.02 mm
- Typical Parts
- Brackets, housings, yokes, blocks
- Fixtures
- Designed and built in-house
- Documentation
- Control plan and FAIR available
VMC Machining Services at a glance
Quotable facts from Avadh Techno Forge, Gundasara, Gondal, Rajkot.
- Table Travel: Up to 1,000 x 500 mm
- Axes: 3-axis with 4th axis option
- Positional Accuracy: ±0.02 mm
- Typical Parts: Brackets, housings, yokes, blocks
- Fixtures: Designed and built in-house
- Documentation: Control plan and FAIR available
Prismatic Machining on Forged Blanks
Face milling, pocketing, slotting, boring, drilling patterns and tapping are completed in one or two setups. Because the forged blank is near-net, cutting time per piece is a fraction of what the same part would need from solid block.
- Face and profile milling
- Bore and pocket machining
- Drilling and tapping patterns
- One or two setup strategies
Fixture Engineering Is the Real Skill
Forgings have draft angles, parting lines and variable stock. Our tool room builds dedicated fixtures that locate on stable forged features and clamp without lifting or bending the part — the difference between a part that measures right on the machine and one that measures right on the customer's gauge.
Documentation for Production Parts
For automotive and export customers we prepare control plans, setup sheets and first-article inspection reports, so a repeat batch two years later runs from the same documented method rather than an operator's memory.
What VMC Work Covers on Forgings
Vertical machining centres handle everything that is not a body of revolution: brackets, housings, yokes, levers, blocks and manifolds. Because a forged blank is already near-net, cutting time per piece is a fraction of what the same part would need from solid block — the saving that usually justifies the die in the first place.
| Capability | Range |
|---|---|
| Table travel | Up to 1,000 × 500 mm |
| Axes | 3-axis, with 4th axis option |
| Positional accuracy | ±0.02 mm |
| Operations | Face milling, pocketing, boring, drilling, tapping |
| Typical parts | Brackets, housings, yokes, levers, blocks |
| Documentation | Control plan and first article reports available |
Fixture Engineering Is the Real Skill
Forgings present draft angles, parting lines and variable stock, so generic workholding rarely serves. Our tool room builds dedicated fixtures that locate on stable forged features and clamp without distorting the part, and the fixture cost is quoted transparently with the part rather than buried. Once a fixture and program are proven, they are recalled for repeat orders — which is why second and subsequent deliveries run faster than the first. See machining problems with forgings.
- Dedicated fixtures designed and built in-house
- One or two setup strategies to limit datum transfers
- Proven programs and fixtures recalled for repeat orders
- Control plans and FAIR prepared for automotive and export work
People also ask
Do you design machining fixtures for forgings?
Yes, in our own tool room. Forgings have draft and parting lines, so dedicated fixtures that locate on stable forged features are essential.
What is your VMC table travel?
Up to 1,000 x 500 mm with 3-axis machining and a 4th axis option.
Topics covered on this page
- VMC machining services Gujarat
- vertical machining centre job work
- VMC milling India
- forged bracket machining
Based on work carried out at our own forging plant at Gundasara, Gondal, Rajkot — operating since 2008.
Questions Answered
Do you design the machining fixture?
+
Yes, fixture design and manufacture happen in our own tool room and the cost is quoted transparently with the part.
Can you machine parts we forge elsewhere?
+
Yes, VMC job work on customer-supplied forgings and castings is accepted.
What is your typical VMC batch size?
+
From 25 pieces for development work up to several thousand per schedule for production parts.
Do you machine aluminium and stainless?
+
Yes, alongside carbon and alloy steel, with separate tooling and coolant practice for each material family.