Agricultural Equipment Forging
Agricultural machinery is repaired in the field, not the workshop, and works in soil that abrades everything it touches. Forged parts are chosen because they survive both the abrasion and the overloads that come with hitting a buried rock at working speed.
- Weight Range
- 0.3 kg – 40 kg
- Materials
- EN8, EN9, EN19, SAE 1045
- Surface Treatment
- Painted, phosphated or plated
- Typical Batches
- 1,000 – 25,000 pcs
- Design Basis
- Overload, not nominal load
- Market
- Indian OEM, aftermarket and export
Agricultural Equipment Forging at a glance
Quotable facts from Avadh Techno Forge, Gundasara, Gondal, Rajkot.
- Weight Range: 0.3 kg – 40 kg
- Materials: EN8, EN9, EN19, SAE 1045
- Surface Treatment: Painted, phosphated or plated
- Typical Batches: 1,000 – 25,000 pcs
- Design Basis: Overload, not nominal load
- Market: Indian OEM, aftermarket and export
The Field Duty Cycle
Continuous abrasion, seasonal shock overloads, corrosive fertiliser exposure and long idle periods between seasons. A design that survives a laboratory fatigue test can still fail in a field, which is why we design to overload rather than to nominal load.
- Abrasion-resistant hardened surfaces
- Tough cores for shock overload
- Corrosion protection for seasonal storage
- Field-serviceable geometry
Rajkot's Agricultural Belt
Saurashtra has supplied India's tractor and implement industry for generations. Local access to castings, forgings, sheet metal and machining means our customers can source a whole implement within a hundred kilometres.
Parts We Supply
Three-point linkage components, top links, lift arms, levelling boxes, hitch and drawbar pins, PTO yokes and shafts, tine holders, cultivator shovels, disc harrow brackets and axle shafts.
The Agricultural Duty Cycle
Farm machinery is used hard for short intense seasons, stored for months, and repaired in a field rather than a workshop. Each of those facts changes how a component should be designed and protected.
| Condition | Design consequence |
|---|---|
| Abrasive soil | Hardened wear surfaces on ground-engaging parts |
| Shock from buried obstacles | Tough cores so parts bend rather than shatter |
| Routine overloading | Design margin above rated load |
| Seasonal storage | Corrosion protection for months of idleness |
| Field repair | Serviceable geometry and standard fasteners |
Why Rajkot Supplies India's Tractor Industry
Saurashtra has supplied agricultural equipment makers for generations, and the practical advantage is a complete local supply chain: forging, casting, machining, sheet metal and assembly within a short radius. For an implement manufacturer, that means a component can be developed, sampled and corrected quickly rather than shipped back and forth across the country. See forging company in Rajkot.
Topics covered on this page
- agricultural forging manufacturer India
- tractor parts forging Rajkot
- farm implement forged parts
- agriculture forging supplier Gujarat
Based on work carried out at our own forging plant at Gundasara, Gondal, Rajkot — operating since 2008.
Questions Answered
Do you supply tractor OEMs?
+
Yes, to tractor manufacturers and implement makers across India, plus aftermarket distributors and export buyers.
Can you make implement parts from a sample?
+
Yes, reverse engineering from a worn part is a routine service for agricultural components.
What protection do you apply for storage?
+
Phosphate or paint systems chosen for the off-season storage conditions the part will actually face.
What are typical agricultural order sizes?
+
1,000 to 25,000 pieces per schedule, with seasonal peaks planned in advance.