Forged Tractor & Agricultural Parts
Agricultural equipment works in abrasive soil, under shock loading, far from any workshop. Rajkot has supplied India's tractor industry for decades precisely because forged parts survive that duty cycle when fabricated alternatives do not.
- Weight Range
- 0.3 kg – 30 kg
- Materials
- EN8, EN19, SAE 1045, 42CrMo4
- Hardening
- Induction or through hardened
- Finish
- Shot blasted, painted or phosphated
- Typical Batches
- 1,000 – 25,000 pcs
- Applications
- Tractors, harvesters, implements
Forged Tractor & Agricultural Parts at a glance
Quotable facts from Avadh Techno Forge, Gundasara, Gondal, Rajkot.
- Weight Range: 0.3 kg – 30 kg
- Materials: EN8, EN19, SAE 1045, 42CrMo4
- Hardening: Induction or through hardened
- Finish: Shot blasted, painted or phosphated
- Typical Batches: 1,000 – 25,000 pcs
- Applications: Tractors, harvesters, implements
The Tractor Forging Family
Top links, lift arms, levelling boxes, hitch pins, drawbar pins, PTO yokes, tine holders, disc harrow brackets and clevis assemblies — the load-carrying parts of every implement interface are forged rather than fabricated.
- Three-point linkage components
- PTO yokes and shafts
- Hitch and drawbar pins
- Tine holders and harrow brackets
Shock and Abrasion Resistance
A plough striking a buried stone delivers a load spike many times the working load. Forged parts absorb it through toughness rather than fracturing, and hardened wear surfaces resist the constant soil abrasion between such events.
Built for the Indian Market
Volumes, price points and duty cycles here differ from European agriculture. Our tooling and process are set up for the Indian tractor segment, and export orders follow the same proven designs with documentation added.
Tractor and Implement Component Capability
Agricultural equipment works in abrasive soil, under shock loading, far from any workshop. Components are therefore designed for overload rather than for nominal load — a plough striking a buried stone delivers a load spike many times the working load, and the part must absorb it through toughness rather than fracture.
| Parameter | Range |
|---|---|
| Weight range | 0.3 kg – 30 kg |
| Materials | EN8, EN19, SAE 1045, 42CrMo4 |
| Hardening | Induction or through hardened as specified |
| Finish | Shot blasted, painted or phosphated |
| Typical batches | 1,000 – 25,000 pieces |
| Linkage categories | Category I, II and III |
Seasonal Storage and Corrosion Protection
Agricultural machinery spends months idle between seasons, often outdoors or in open sheds, and corrosion during that idle period is a real cause of complaint. Protection is chosen for the storage conditions the part will actually meet rather than for the operating condition alone — phosphate and paint for most implement hardware, heavier systems where machinery is stored in the open. See agricultural equipment forging.
- Designed for overload, not just rated load
- Hardened wear surfaces over tough cores
- Protection specified for off-season storage
- Supplied to tractor OEMs, implement makers and the aftermarket
Topics covered on this page
- forged tractor parts manufacturer India
- agricultural forging supplier Rajkot
- three point linkage forging
- tractor spare parts forging India
Based on work carried out at our own forging plant at Gundasara, Gondal, Rajkot — operating since 2008.
Questions Answered
Do you supply tractor linkage sets?
+
Yes, top links, lift arms, levelling boxes and pins can be supplied as matched sets to a category specification.
Which tractor categories do you cover?
+
Category I, II and III three-point linkage hardware, plus implement-specific components to drawing.
Can you supply painted parts?
+
Yes, shot blasted and painted to your colour and film thickness specification.
What are typical order quantities?
+
1,000 to 25,000 pieces per schedule for tractor OEM and aftermarket customers.