Forged Lifting Hooks & Rigging Hardware
Lifting hardware is the clearest case for forging in all of engineering: the load is overhead, people work beneath it, and every standard worldwide requires forged construction with proof load testing and certification.
- Working Load Limits
- 0.5 T – 30 T
- Materials
- EN8, EN19, 42CrMo4, alloy grades
- Proof Test
- As per applicable standard
- Inspection
- 100% MPI after proof load
- Marking
- WLL, grade, size, batch
- Products
- Hooks, shackles, eye bolts, master links
Forged Lifting Hooks & Rigging Hardware at a glance
Quotable facts from Avadh Techno Forge, Gundasara, Gondal, Rajkot.
- Working Load Limits: 0.5 T – 30 T
- Materials: EN8, EN19, 42CrMo4, alloy grades
- Proof Test: As per applicable standard
- Inspection: 100% MPI after proof load
- Marking: WLL, grade, size, batch
- Products: Hooks, shackles, eye bolts, master links
Proof Load Testing and Certification
Every unit is proof loaded to the multiple of working load limit specified by the standard, then inspected for permanent deformation and cracks. A test certificate carrying the batch and heat number accompanies each consignment.
- Proof load tested to standard
- Post-test dimensional check
- Magnetic particle inspection
- Certificate per batch
Ductile Failure by Design
Rigging hardware is designed to deform visibly before it breaks, giving warning. That behaviour depends on forged ductility and correct tempering — it is not available from a hard, brittle cast equivalent.
Marking and Traceability
Working load limit, grade, size and batch identification are permanently marked on every piece, so an inspector can verify capacity and traceability years into service.
Proof Load Testing and Certification
Lifting hardware is the clearest case for forging anywhere in engineering: the load is overhead, people work beneath it, and standards worldwide require forged construction with proof load testing and certification. Every unit is proof loaded, then inspected for permanent deformation and cracks before it is certified.
| Parameter | Range |
|---|---|
| Working load limits | 0.5 T – 30 T |
| Materials | EN8, EN19, 42CrMo4 and alloy grades |
| Proof test | 100%, to the applicable standard |
| Post-test inspection | Magnetic particle inspection and dimensional check |
| Marking | WLL, grade, size and batch |
| Products | Hooks, shackles, eye bolts, master links |
Designed to Warn Before It Fails
A correctly forged and tempered hook stretches visibly before it breaks, and its throat opening increases measurably. That behaviour is designed in, not incidental: inspection regimes measure throat opening precisely because it records accumulated overload. A hard, brittle hook would snap without warning, which is why hardness is controlled rather than maximised. A hook showing increased throat opening has been overloaded and must be removed from service. See why lifting hooks fail.
People also ask
Is every lifting hook proof load tested?
Yes, 100% proof loaded to the applicable standard, then magnetic particle inspected and dimensionally verified before certification.
What working load limits do you supply?
0.5 tonne to 30 tonne across hooks, shackles, eye bolts and master links, each permanently marked.
Topics covered on this page
- forged lifting hook manufacturer India
- rigging hardware forging supplier
- forged shackle manufacturer
- lifting equipment forging Rajkot
Based on work carried out at our own forging plant at Gundasara, Gondal, Rajkot — operating since 2008.
Questions Answered
Is every lifting item proof load tested?
+
Yes, 100% proof load testing followed by magnetic particle inspection and dimensional verification.
Do you provide test certificates?
+
Yes, a certificate stating proof load, result and traceability data accompanies every consignment.
What working load limits do you cover?
+
0.5 tonne to 30 tonne across hooks, shackles, eye bolts and master links.
Is the WLL marked on the product?
+
Yes, working load limit, grade, size and batch identification are permanently marked.